Lennarz: Created page with "Trying scan with EMBD:MB0 Disabling the detectors around 5:22PM 0.001 FC6 reading 220uA. 1kHz, 5us Starting at –33A. *EINJ at 950 instead of 975. In terms..."

2021-08-11T18:34:57Z

Created page with "*Trying scan with EMBD:MB0 *Disabling the detectors around 5:22PM *0.001 *FC6 reading 220uA. *1kHz, 5us *Starting at –33A. *EINJ at 950 instead of 975. In terms..."

New page

*Trying scan with EMBD:MB0

*Disabling the detectors around 5:22PM

*0.001

*FC6 reading 220uA.

*1kHz, 5us

*Starting at –33A.

*EINJ at 950 instead of 975. In terms of energy this should be similar. Might make difference in dark current. PMT3 still around 300pC though.

*Step rate 0.005A

*@17:31 Starting scan!

*Slowing down to 0.001A at 17:32

*Slowing to to 0.0005A at 17:34

*@17:38 getting close to the dump. Riley mentioned we may not see anything, as it wasn't tuned that way and elements would be off?

*@17:41 Speeding up x2

*@17:52 slowing to to 0.0005A again

*@18:00 speeding up x2

*@18:02 speeding up x5 to 0.005A

*@18:07 Finished scan.

*Data dumped under http://isacwserv.triumf.ca/onlylocal/elinacdata/striptool/Results/MPS_Commissioning2020/AUG10_EMBT-MB0_scan

Elog Entry 2021-08-10 - Revision history

Lennarz: Created page with "*Trying scan with EMBD:MB0 *Disabling the detectors around 5:22PM *0.001 *FC6 reading 220uA. *1kHz, 5us *Starting at –33A. *EINJ at 950 instead of 975. In terms..."

Lennarz: Created page with "Trying scan with EMBD:MB0 Disabling the detectors around 5:22PM 0.001 FC6 reading 220uA. 1kHz, 5us Starting at –33A. *EINJ at 950 instead of 975. In terms..."