Lennarz: Created page with "== Dark current scans == Performed dark current scans in medium energy section this week with MB5A/C and MB0 EINJ was at setpoint 900 ~9.5 MeV *EMBT:PMT3 was mostly at 55pC,..."

2021-09-22T22:30:52Z

Created page with "== Dark current scans == *Performed dark current scans in medium energy section this week with MB5A/C and MB0 *EINJ was at setpoint 900 ~9.5 MeV *EMBT:PMT3 was mostly at 55pC,..."

New page

== Dark current scans ==
*Performed dark current scans in medium energy section this week with MB5A/C and MB0
*EINJ was at setpoint 900 ~9.5 MeV
*EMBT:PMT3 was mostly at 55pC, but went up to 70pC with a few spikes, otherwise constant level.
*Stephi said, the magnet settings were spikes occurred are unlikely tunes.
*EPICS connection from home was slow for Stephi, which was an issue for ramping magnet current
**Emphasized need for automated ramping program. Operator should step size and limit.

== E-Linac Status ==
*E-Linac was down last week --> No beam
*Wednesday morning, Stephi and Ops had issues with the 2 low-energy PMTs tripping, while beam was supposed to be on EHD.
*

MPS Minutes 20210902 - Revision history

Lennarz: Created page with "== Dark current scans == *Performed dark current scans in medium energy section this week with MB5A/C and MB0 *EINJ was at setpoint 900 ~9.5 MeV *EMBT:PMT3 was mostly at 55pC,..."

Lennarz: Created page with "== Dark current scans == Performed dark current scans in medium energy section this week with MB5A/C and MB0 EINJ was at setpoint 900 ~9.5 MeV *EMBT:PMT3 was mostly at 55pC,..."