Elog Entry 2021-05-27: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Detector testing= *EHAT:PMT5, 50V, ramps up, 0.08uA readback. LED cable now connected with new connector. Works. Using driver channel 5. ~250pC at 70%.") |
|||
Line 1: | Line 1: | ||
=Detector testing= | =Detector testing= | ||
*EHAT:PMT5, 50V, ramps up, 0.08uA readback. LED cable now connected with new connector. Works. Using driver channel 5. ~250pC at 70%. | *EHAT:PMT5, 50V, ramps up, 0.08uA readback. LED cable now connected with new connector. Works. Using driver channel 5. ~250pC at 70%. | ||
=Detector installation= | |||
*Installed spare PMT (previous ELBT:PMT1A) at window on gun. Connected cables for ELBD:PMT0 because that set had LED cable. | |||
*Place mic stand on EAST side in low energy section for ELBT:PMT1B installation. Connected all cables. All labeled correctly. | |||
*Note, LED cable label for PMT1C is EACB:LED. |
Revision as of 19:28, 27 May 2021
Detector testing
- EHAT:PMT5, 50V, ramps up, 0.08uA readback. LED cable now connected with new connector. Works. Using driver channel 5. ~250pC at 70%.
Detector installation
- Installed spare PMT (previous ELBT:PMT1A) at window on gun. Connected cables for ELBD:PMT0 because that set had LED cable.
- Place mic stand on EAST side in low energy section for ELBT:PMT1B installation. Connected all cables. All labeled correctly.
- Note, LED cable label for PMT1C is EACB:LED.