Turn on Argon flow: Difference between revisions

From MPS Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by the same user not shown)
Line 4: Line 4:
*Open the valve
*Open the valve
*Check flow
*Check flow
*Check flow on epics
*Check flow on epics: From Ariel E-Linac Epics menu go to 'MPS' => 'Beam loss monitors'. The following page should be displayed to check the flow status:


[[File:Arflow.png|500px|Argon flow indicator on epics]]
[[File:Arflow.png|500px|Argon flow indicator on epics]]


*Tell operators they may expect alarms
*Tell driver operators they may expect alarms

Latest revision as of 21:47, 20 June 2022

  • Go to the gas shed across the badge room
  • You may need a 2T85 key if the shed is closed
  • To initiate the Argon flow, open both Argon bottles (on your left, when entering the gas shed)
  • Open the valve
  • Check flow
  • Check flow on epics: From Ariel E-Linac Epics menu go to 'MPS' => 'Beam loss monitors'. The following page should be displayed to check the flow status:

Argon flow indicator on epics

  • Tell driver operators they may expect alarms