MPS Minutes 20240411: Difference between revisions

From MPS Wiki
Jump to navigation Jump to search
Line 33: Line 33:
==Fibre/Simulations==
==Fibre/Simulations==
*No updates from Alexey
*No updates from Alexey
*Has working simulation and now just doing checking of various positioning of detectors
*Put LICs along the beamline in simulation, will determine on how many we need
*Timeline for when the beamlines will be in place?
*Will beamlines be installed both at the same time? Probably?
*Need to have large benders from BL4N installed first
*


==AOB==
==AOB==

Revision as of 17:17, 11 April 2024

Present: Commenced: 10:00am Adjourned:

MPS Status

  • Argon only turned on during force tests
  • Detectors in working order

BLM force tests

  • Straight forward so far
  • Prevention of second force
  • if applying second force, instead of rejecting it, it removes force from first detector and forces the other
  • EHAT:LIC1 (has 2 sets of redundancies)
  • EHAT:LIC2 ()
  • Done half of the BLMs without beam
  • And then do the beam tests
  • ELBT wouldn't include any force parts
  • April 22nd was the plan for beam back, but need to get egun oil
  • April 22nd shielding should be replaced that day
  • Collimator in the making (in one of the machine shops)
  • Designed by sci-tec
  • No installation before summer
  • Need specs from Stephanie
  • Need work request for the install, so likely needed since multiple groups will be involved

Collimator in front of dump

  • Has been installed by Doug
  • Next steps?
  • Do we have specs, to check if it can be implemented into our MPS system? ==> Stephanie

Fibre/Simulations

  • No updates from Alexey
  • Has working simulation and now just doing checking of various positioning of detectors
  • Put LICs along the beamline in simulation, will determine on how many we need
  • Timeline for when the beamlines will be in place?
  • Will beamlines be installed both at the same time? Probably?
  • Need to have large benders from BL4N installed first

AOB