Elog Entry 2021-05-27: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 6: | Line 6: | ||
*Place mic stand on EAST side in low energy section for ELBT:PMT1B installation. Connected all cables. All labeled correctly. | *Place mic stand on EAST side in low energy section for ELBT:PMT1B installation. Connected all cables. All labeled correctly. | ||
*Note, LED cable label for PMT1C is EACB:LED. | *Note, LED cable label for PMT1C is EACB:LED. | ||
=LED labels= | |||
*Connected EACB:PMT1:LED to LED driver channel 2 on roof. Cable will be used for to ELBT:PMT1C detector in hall. Present label is EACB:PMT1:LED. | |||
Revision as of 19:36, 27 May 2021
Detector testing
- EHAT:PMT5, 50V, ramps up, 0.08uA readback. LED cable now connected with new connector. Works. Using driver channel 5. ~250pC at 70%.
Detector installation
- Installed spare PMT (previous ELBT:PMT1A) at window on gun. Connected cables for ELBD:PMT0 because that set had LED cable.
- Place mic stand on EAST side in low energy section for ELBT:PMT1B installation. Connected all cables. All labeled correctly.
- Note, LED cable label for PMT1C is EACB:LED.
LED labels
- Connected EACB:PMT1:LED to LED driver channel 2 on roof. Cable will be used for to ELBT:PMT1C detector in hall. Present label is EACB:PMT1:LED.