Elog Entry 2021-05-27

From MPS Wiki
Revision as of 19:36, 27 May 2021 by Lennarz (talk | contribs)
Jump to navigation Jump to search

Detector testing

  • EHAT:PMT5, 50V, ramps up, 0.08uA readback. LED cable now connected with new connector. Works. Using driver channel 5. ~250pC at 70%.

Detector installation

  • Installed spare PMT (previous ELBT:PMT1A) at window on gun. Connected cables for ELBD:PMT0 because that set had LED cable.
  • Place mic stand on EAST side in low energy section for ELBT:PMT1B installation. Connected all cables. All labeled correctly.
  • Note, LED cable label for PMT1C is EACB:LED.

LED labels

  • Connected EACB:PMT1:LED to LED driver channel 2 on roof. Cable will be used for to ELBT:PMT1C detector in hall. Present label is EACB:PMT1:LED.
Retrieved from "http://mps.wiki.triumf.ca/w/index.php?title=Elog_Entry_2021-05-27&oldid=87"